Home

What to Check Before Buying a Used Sewing Machine

Before buying a used sewing machine, check that it suits your projects, inspect its condition and try sewing with it yourself. Confirm that you can get essential accessories and replacement parts, then compare the asking price plus likely repair costs with the cost of a working alternative.

Which type of sewing machine do you need?

Start with the work you plan to do. For alterations and everyday garment sewing, you'll usually need straight stitch, zigzag, reverse and a working buttonhole function. An overlocker trims and finishes fabric edges, but it doesn't replace a conventional sewing machine for tasks such as inserting zips.

Bring samples of the fabrics you usually sew. A machine that sews two layers of cotton neatly may struggle with bulky denim seams or stretch jersey. Check that its presser foot lifts high enough for the layers you plan to sew. Don't assume that an older metal body means greater sewing power.

Mechanical controls can make basic operation straightforward, while computerised models may offer adjustable needle positions, speed control and automatic buttonholes. Neither type is necessarily the better purchase. Choose features you'll use, and check that you can find someone to repair that particular model.

What should you ask the seller?

Get the exact model number from the machine's identification plate, not just the name printed on the front. Use it to find the instruction manual and identify the correct bobbins, needles and accessories before you visit.

Ask when the seller last used it, what they sewed and why they're selling it. Request service receipts if they have them, and ask directly about recurring faults, repairs, storage conditions and any missing components.

If the seller says it was recently serviced, ask for an invoice describing the work. Don't assume that a machine is in good condition because it hasn't been used much: lubricants can stiffen, metal parts can corrode and electrical components can deteriorate. Treat an untested machine as a repair risk, not a working bargain.

What should you inspect before switching it on?

Ask the seller to unplug the machine before you inspect the needle area or open covers intended for user access. Don't remove electrical housings or dismantle mechanisms during a viewing.

  • Inspect the plug, power cable and foot-controller lead for exposed wires, cracked insulation, taped repairs or heat damage.
  • Look for rust, water marks, cracked castings and damaged hinges or mounting points.
  • Check the needle plate and presser foot for deep needle strikes, rough edges or burrs that could snag thread.
  • Open the bobbin compartment and look for compacted lint, corrosion, broken pieces or a damaged bobbin case.
  • With the machine unthreaded, turn the handwheel in the direction specified in the manual and check for binding or hard stops.

You can usually overlook minor cosmetic scratches, but be more cautious about heavy corrosion or a jammed mechanism. A little lint is normal. If you find thick deposits or signs of neglected moving parts, ask more questions about maintenance.

Don't switch on a machine with damaged wiring or signs of overheating. Have a qualified repairer check it first; Electrical Safety First provides guidance on recognising electrical hazards. For an imported model, confirm that the voltage and frequency on its rating plate match your electricity supply. A plug adaptor doesn't convert voltage.

How do you test a used sewing machine?

Ask the seller to demonstrate threading and bobbin insertion, then operate the machine yourself. Use a suitable new needle, good-quality thread in good condition and the correct bobbin so that problems with these items don't affect the test. Keep your fingers clear of the needle and stop before making adjustments near it.

  1. Sew straight stitches on two layers of medium-weight woven cotton at slow and moderate speeds.
  2. Change the stitch length and check that the spacing changes visibly and consistently.
  3. Test reverse, zigzag, needle-position controls and any stitches you expect to use.
  4. Sew a complete buttonhole with the correct foot if you plan to sew buttonholes.
  5. Try your own fabric samples, including a typical seam crossing or folded hem.
  6. Test bobbin winding, the presser-foot lifter, speed control and any automatic functions the model has.

Examine both sides of the seam. On ordinary woven fabric, a balanced straight stitch shouldn't leave loose loops on either side. Check that the fabric feeds consistently without frequent skipped stitches, thread breaks or severe puckering.

Listen for grinding, knocking or squealing, and check that you can start slowly and increase speed gradually with the foot controller, rather than having the machine suddenly race. Stop if you notice smoke, a burning smell or unusual heat.

Threading errors can cause poor stitches, so allow time to rethread carefully and test again. However, don't accept an unverified explanation such as “it only needs the tension adjusting.” If the machine keeps skipping stitches, jamming or feeding unevenly, get a repair assessment before you agree on a price.

Which accessories and spare parts do you need?

Confirm that the sale includes a compatible foot controller, power lead, standard presser foot and any removable bobbin case the model requires. Check the accessory compartment for the buttonhole foot, zip foot, spare bobbins and other items shown in the manual.

Bobbins that look similar can differ in height, diameter or shape. Likewise, presser feet and needle systems aren't universal. Check the cost of missing essentials for the exact model rather than assuming a generic replacement will fit.

Contact a sewing-machine technician about parts availability, especially for discontinued models. Ask about model-specific gears, controllers and electronic boards. On computerised machines, test the display and every selection button; you could face an uneconomical repair for an electronic fault even if the sewing mechanism appears sound.

How much will the machine cost in total?

Compare the asking price with similar machines you've seen working, rather than relying on optimistic advertisements. Include transport, missing accessories, a service and any quoted repairs in your total purchase cost. For an industrial machine, also account for the table, motor, available space and power requirements.

Ask a private seller whether you can test the machine before payment. If you're buying from a dealer, get the stated condition, included accessories, warranty and return terms in writing.

Walk away if the seller refuses a reasonable sewing test, the machine has unresolved electrical damage or you can't source essential parts. If it needs repairs, get a technician's estimate before negotiating. Base your decision on how well the machine works and suits your needs, not its appearance or a promise that a fault is minor.

Sources