An overlocker, also called a serger, wraps thread around fabric edges, usually trimming excess fabric at the same time. You'll find one useful if you regularly sew stretch garments or want faster, neater seam finishes, but you'll still need a regular sewing machine for other tasks.
How does an overlocker work?
An overlocker uses needles and loopers to form stitches around the cut edge of your fabric. Loopers are moving metal parts that carry thread above and below the fabric, creating the interlocking loops you see along the edge. Unlike a conventional domestic sewing machine, an overlocker doesn't use a bobbin.
On most domestic models, a moving knife trims the fabric just before the stitches wrap around the edge. This gives you an even, finished edge in one pass. You can disengage the knife on many models, but check your manual before doing so.
The stitch forms over a small support called a stitch finger. Your stitch width, stitch length and thread tension determine how neatly the loops sit against the fabric. If you see loose loops hanging beyond the edge or a tightly rolled, puckered seam, you'll usually need to adjust the settings.
What can you sew with an overlocker?
You'll find an overlocker particularly useful for making garments, but you can also use it to finish edges on cushion covers, curtains and other household projects. Your results depend on the stitch you select, the fabric and how you feed it through the machine.
- Stretch seams: Join jersey and other knitted fabrics with a suitable overlock stitch that stretches with the material.
- Raw edge finishing: Stitch around woven fabric edges to reduce fraying before or after joining the pieces on your sewing machine.
- Rolled hems: Create narrow finishes on suitable lightweight fabrics for projects such as scarves, ruffles and occasionwear details.
- Decorative edges: Use suitable decorative thread in the loopers for visible edging, following your machine's threading recommendations.
- Gathering: Gather some lightweight fabrics using differential feed, sometimes with a dedicated gathering foot.
You can use a common four-thread overlock stitch to join and finish many knit seams in one operation. For woven garments, you may still need to sew a conventional straight-stitched seam and use the overlocker only to neaten the seam allowances. Choose your seam method to suit the garment's design and the strain the seam will need to withstand.
Can an overlocker replace a sewing machine?
Keep your regular sewing machine for straight stitching, buttonholes, most zip insertions, darts and precise topstitching. A standard overlocker works along fabric edges, so you can't use it for many tasks that require stitching through the middle of a piece.
If you're buying your first machine for general sewing, a conventional sewing machine is usually the more useful choice. You can finish many woven fabric edges with its zigzag or overcasting stitch. For occasional knit projects, you may only need a suitable stretch stitch and the correct needle.
Don't confuse an overlocker with a coverstitch machine. Coverstitching produces the parallel rows you commonly see on T-shirt hems, with looping thread underneath. You can't make that same hem with a standard overlocker, although some combination machines let you switch between overlock and coverstitch functions.
You can use a twin needle on a compatible sewing machine to create a hem that looks similar from the right side. It isn't identical to a coverstitch, and you'll need to test the stretch and tension on your fabric.
When do you need an overlocker?
You're most likely to benefit if you regularly make T-shirts, leggings, underwear or other knit garments. With a suitable overlock seam, you can let the fabric stretch without relying on a rigid straight stitch, while trimming and finishing the edge as you sew.
An overlocker can also save you time if you sew batches of garments or spend a lot of time neatening seam allowances. You can reduce repetitive work by combining these steps, although you'll still need time for threading, testing and securing thread tails.
You can usually postpone buying one if you mainly quilt, make occasional repairs or sew simple woven projects. You may prefer enclosed seams, such as French seams, to an exposed overlocked finish. You also can't use an overlocker to correct inaccurate cutting, poor fit or unsuitable fabric choices.
Look at your recent projects rather than buying for every possible future use. If edge finishing repeatedly slows you down, or you regularly sew knit seams, you have a clear reason to buy one.
What features should you look for in an overlocker?
Look for four-thread stitching as a practical starting point for general garment sewing. Four-thread overlocking usually uses two needles and two loopers. Three-thread overlocking uses one needle and two loopers, and you'll commonly use it for edge finishing. Some machines also offer two-thread stitches for lighter finishes.
Differential feed lets the front and rear feed dogs move fabric at different rates. Feed dogs are the toothed parts beneath the presser foot that move your fabric through the machine. By adjusting their relative movement, you can reduce wavy knit seams or unwanted puckering. You'll need to choose the setting to suit your fabric.
Prioritise accessible threading paths, clear tension controls and an easy changeover to rolled hemming. Air threading can simplify looper threading, but you'll still need to thread the needles correctly and choose suitable settings. Before you buy, check the cost and availability of needles, replacement knives and servicing.
How do you start using an overlocker?
Ask for a demonstration with fabrics you actually sew. Test a stable woven fabric, a jersey and any lightweight fabric you use in your projects, rather than judging the machine only by a prepared sample.
- Follow your manual's threading order and use the specified needle system.
- Test on scraps with the same number of layers as the seam you plan to sew.
- Check that the edge lies flat and that the seam stretches as much as you need without threads breaking.
- Guide the fabric without pulling it, keeping your intended seam line clear of the knife.
- Secure thread tails using a method suitable for your project, such as weaving them back through the stitches.
Keep pins away from the knife and needles, and remove them before they reach the stitching area. Switch off and unplug your machine before changing needles, cleaning around the knife or carrying out maintenance, following your manual's instructions. Trim cautiously: once you cut away a seam allowance, you can't restore it.